Fatboy Pencil

Never break your lead again with the FastCap FatBoy Pencil. It combines the utility of a mechanical pencil with the strength of a carpenter pencil. Easily sharpens in a standard pencil sharpener and the unbreakable 5.5mm lead stays sharp longer.

#FATBOY PENCIL
$16.92  reg. $19.90   Save 15%

3 Way Clamp

Edge trim isn't always easy to install and taping trim doesn't always provide the pressure needed for bonding edging. FastCap's 3 Way Clamp combines the usual spring clamp with an additional spring that applies a third direction of pressure. With approximately 30 lbs of clamping pressure, the 3 Way Clamp can provide a better bond.

#3 WAY CLAMP

$5.09   reg. $5.99    Save 15%

2-PC Little Hand HD + Bag

The Little Hand provides a helping hand when installing upper cabinets after the base cabinets have been installed. 16.5" to 23.5" adjustment. Designed for residential construction. A 2-piece system with carrying bag

#3-H LITTLE 2PC SYS

$ 95.96    reg. $112.89    Save 15%

3rd Hand 2-piece Upperhand System

The Upper Hand is a versatile mid-sized 3rd Hand product with a measurement of 28 inches and can extend to 60 inches. The Upper Hand is perfect for installing upper cabinets before the base cabinets are installed.

#3-H UPPER 2PC SYS

$ 117.30   reg. $138    Save 15%

SpeedClip tape measure belt clip

Never have torn pants from your tape measure again. Easily clips over pants or belt and includes a slot to hold a standard or carpenter pencil, built-in pencil sharpener, and holes for mounting on a workbench.

(tape measure not included)

#SPEEDCLIP
$1.91   reg. $2.25   Save 15%

AccuScribe Pro

The AccuScribe Pro makes it easy to maintain a consistent scribe offset, staying parallel to the object surface every time. It is ideal for scribing trim on kitchen cabinets, architectural moldings, countertops, splash guards, tile and even flooring. Fits a standard pencil, Sharpie, or FatBoy Pencil.

#ACCUSCRIBE PRO

$ 18.51   reg. $21.78   Save 15%

Zero Clearance Tape

Brings a whole new level of precision to your miter saw. Apply over the throat of your saw to eliminate chip out and create an exact reference for line-up. Made from durable PVC, they will last for many jobs. 5-pk of 2" x 16" strips.

#ZCZCT

$ 6.44   reg. $7.58   Save 15%

TriBlade Utility Knife

The rubberized grip makes it comfortable to hold and the retractable self-locking blade makes it safe to use. Additional storage for 2 extra blades.

#TRIBLADE

$ 3.61   reg. $4.25   Save 15%

11th Finger Magnetic Push Stick

Keep your fingers safely away from the saw blade with the 11th Finger. The durable nylamax push stick is constructed to prevent damage to your saw blade. Has two powerful neodymium magnets and an ergonomic handle.

#FC11FINGER

$ 11.26   reg. $13.25   Save 15%

3-Piece Self-Centering Hinge Bit Set

Use Snappy self-centering hinge bits to accurately drill pilot holes in hinges, handles, drawer slides and other hardware. Includes 3 self-centering hinge bits: 5/64″, 7/64″ & 9/64″ and one 1/8″ hex key. 1/4″ Hex Power Bit Shank

#45300

$ 28.09   reg. $33.05   Save 15%

5-Piece Countersink Set

Drill the pilot hole and countersink or counterbore for screws in one easy step. Countersink to drive the head of the screw flush with or slightly below the surface. Easily control depth using an optional stop collar. Counterbore to drive the screw below the surface and plug the hole. The 82° countersink angle matches the angle on the head of most wood screws. Includes 5 gold screw countersinks: 5/64″x 3/8″, 3/32″x 3/8″, 7/64″x 3/8″, 1/8″x 3/8″ & 9/64″x 1/2″ and one 1/8″ hex key. 1/4″ hex power bit shank

#40030

$ 29.44  reg. $34.63    Save 15%

3-Piece Tapered Plug Cutter Set

Snappy tapered plug cutters cut plugs to conceal screws and other fasteners. Use scraps to match wood grain, making the plug nearly invisible or, for a decorative look, use a contrasting wood. Four precision-milled angles on each of the four flutes ensure a smooth cut and a tight-fitting, consistent taper. No glue needed. The chamfered nose makes it easy to get the plug started into the bore. For use in drill press only, with board clamped to table. Includes 1/4″, 3/8″, and 1/2″ sizes. 1/4″ hex power bit shank.

#43300

$ 31.22   reg. $36.73   Save 15%