West System Epoxy

WS105B

105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties...

WS105A

105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties...

WS205B

205 Fast Hardener is a medium-viscosity epoxy curing agent that is useful in a majority of bonding situations, and at lower temperatures.

WS206B

206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed.

WS206A

206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed.

WS207SA

Blush-free 207 Special Clear Hardener is for coating and fiberglass cloth applications where an exceptionally clear, moisture-resistant, natural wood finish is desired.

WS207SB

Blush-free 207 Special Clear Hardener is for coating and fiberglass cloth applications where an exceptionally clear, moisture-resistant, natural wood finish is desired.

WS404-15

404 High-Density Adhesive Filler is an epoxy thickening additive. It offers maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated.

WS407-5

407 Low-Density is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty.

WS410-2

410 Microlight is the ideal low-density filler. When you blend it with epoxy, it creates a light, easily-worked epoxy fairing compound.

WS423

423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance and durability.

WS650-K

Repair the most common problems with aluminum boats and canoes – leaking seams and rivets.

WS650-8

G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.

WS655-8

G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods.

WS101

Everything you need to complete small repairs around the boat, shop or home.

WS610

Six10 Thickened Epoxy Adhesive combines the strength, reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-and-shoot convenience.

WS600-2

Additional static mixing wands for Six10 Thickened Epoxy Adhesive.

WS810-2

Fillable and designed for use with a standard caulking gun.

WS808-2

Flexible, reusable plastic spreaders for flow coating, fairing, filling and applying fabrics.

WS729-10

Versatile 9 oz woven E-glass Fabric Tape is ideal for reinforcing chines, hull/deck corners, and similar structural applications.

WS732-10

Versatile 9 oz woven E-glass Fabric Tape is ideal for reinforcing chines, hull/deck corners, and similar structural applications.

WS803-12

Disposable glue application brushes for a wide variety of small epoxy bonding and coating applications.

WS300

Mini Pumps are designed for convenient and accurate metering of Group A, B, and C WEST SYSTEM 105 Resin-based epoxy.

WS805

Reusable, heavy-duty plastic mixing pot.

WS806

Reusable, heavy-duty plastic mixing pot.

WS809

4″ x 4″ plastic spreader with 1/8″, 3/16″ and 1/4″ notches on three sides for quickly applying thickened epoxy at a constant rate over large areas.

WS800-2

Thin polyurethane foam covers that allow you to control epoxy film thickness, avoid drips and runs, and get a smoother epoxy coating overall.

WS807-2

Reusable 807 Syringes can be loaded with your epoxy mixture for injecting into tight spots.